ST 2520
The flatbed 2 plate ST2520 rewinder is the ideal partner for film archives, film laboratories, projection rooms or film subtitling companies.The ST2520 offers:
- Easy handling by hand or foot control
- Very slow speed for inspection film perforation, damages, cutting/ editing and cleaning film purposes
- Fast winding of 16 and 35mm picture / sound film and 17,5mm sound film in A-wind.
- Checking measurements of film by electronic universal counter. (Option ST2552)
Small and easily moveable chassis. Solvent resistant table top with enough space to work for the operator.
Take-up assemblies for 600 meter / 2000 feet film on (16mm) spools or bobbins or 1000 meter of PE sound film.
Illuminated ground glass for controlling individual frames.
Fast and sensitive film transport in both directions.
Automatic stop at film end or when film breaks with warning signal by buzzer, Dimmer with socket is installed for working lamp (max. 75 watt).
Working lamp optional.
Installed is standard a elapsed hour counter for maintenance.
Transport castors with brakes.
TECHNICAL DATA:
The 2 plate rewinder is capable of handling all picture and magnetic sound films 16 / 17,5 / 35mm.
Rewinding and speed regulation is accomplished by hand or foot control.
One-motor drive with belt system for both winding directions.
The maximum speed range is available in both directions.
Fully variable rewinding speed of max. 5 meters per second. (EU regulation)
This is for 600 meters / 2000 feet of film is approx. 3 minuts.
Adjustable film tension of the frictions remains steady over full film length.
Take-ups with film plates to accept bobbins according to DIN 15531 and 16m reels according to DIN 15621.
| Power requirements: | 220 / 240 Volts – 50 / 60 Hz. | |
| On request: | 110 / 110 Volts – 50 / 60 Hz. | |
| Power consumption: | approx. 600 watt. | |
| Table size: | width 107cm - depth 70cm - height (bench) 81cm (height incl. counter 97cm | |
| Weight: | approx. 60 kg. | |
| Fuses: | Main power inlet EU socket (outside): Illuminated ground glass (outside): PSU counter system (inside): Driver board (inside): |
2 x 3,00 (T/S) Amps. 1 x 0,315 (T/S) Amps. 1 x 0,315 (T/S) Amps. |
OPTIONAL EXTRAS:
| ST 57 | Table working lamp. |
| ST 2552 | Electronic universal processor counter including sprockets for (S)16 – 17,5 – 35mm |
| ST 2553 | Foot switch / control |
[top]